For a seamless, professional, water-resistant finish over fibre cement joints, James Hardie™ Top Coat is the only logical choice. James Hardie Top Coat is a smooth polymer-enhanced finishing compound designed to be used over James Hardie™ Base Coat. It comes premixed to ensure ease of use.
James Hardie Top Coat can be used with Villaboard Lining on internal walls and ceilings, as well as sheltered exterior applications including eaves and soffits. However, it has not been approved for use with HardiTex Base Sheet, Monotek Sheet, or non-James Hardie products.
Features
- Using a 250mm trowel, apply a coat of James Hardie Top Coat 280mm wide centrally over the joint. Note: If it is a butt joint, apply this coat approximately 500mm wide.
- Trowel the James Hardie Top Coat smooth and flat ensuring that the edges are well feathered.
- Allow to dry completely.
- Apply a thin finishing coat of James Hardie Top Coat over the James Hardie Base Coat smoothing out with a corner tool.
- Allow to dry completely.
- Apply a finishing coat of James Hardie Top Coat to fastener heads, fully covering any James Hardie Base Coat. Feather out the edges.
- Allow to dry completely.
