Cabot's 4L Clear Water Based CFP Floor Satin

Highly durable|Hard wearing|Fast drying finish|Cabot's CFP Floor Water Based is a hardwearing, clear floor coating suitable for all interior timber parquetry and cork flooring. Highly durable, it's been formulated to be hard wearing and has a fast drying finish. No sanding is required on pre-coated timber, saving you time and hassle.Preparation^ No sanding required for pre-coated timber floors, preparation steps below must be followed. Please note new timber must be sanded.Remove stains, dirt, wax, grease and oil with mineral turpentine.Remove any polish with a suitable floor polish remover.Note: Floors with highly visible scratches, imperfections or floors that are severely worn must be sanded before coating.Bare TimberSand the surface smooth using 180 - 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust.Previously coated floors and timber floating floorsThoroughly clean the surface with Cabot's Floor Clean and allow to dry. Apply one coat to a small test area. Allow to dry for 3 hours. Press sticky tape firmly to the surface and pull off quickly. If the coating comes off, sanding back to a sound surface will be required.Note: Fill nail holes, cracks and other defects with Cabot's Wood Tone Putty after applying the first coat of this product for accurate colour matching.ApplicationApply with a 6-10mm nap roller, brush, pad applicator Note: Do not shake can.1. Stir thoroughly with a broad flat paddle before and during use.2. Use a brush to cut in around the edge of one section at a time.3. Apply product with a pad applicator, good quality brush or 6 - 10mm nap roller. Coat along the length of 3 - 4 boards, keeping a wet edge to prevent lap marks.4. Allow to dry for a minimum of 3 hours. For best results, lightly sand to remove any grain raise using 240 grit paper. Remove all sanding dust.5. Apply the 2nd and 3rd coats as above.Bare timber floors -Apply 3 coats, allowing 3 hours between coats.Previously coated floors -Apply 2 coats, allowing 3 hours between coats.Staining bare timber floors - 1. If staining is required, apply 1 coat of CFP Floor Water Based as a sealer.2. Apply 1 - 2 coats of Cabot's stain and varnish water-based with a 6 - 10mm nap micro-fibre roller.3. Finish with 2 coats of Cabot’s CFP Floor Water Based following application instructions above.Note: To stain a previously coated timber floor, sand back to bare timber before staining.Maintenance - Cabot's Floor Clean is recommended for regular cleaning.Once your timber floors have become excessively scratched, it's time for a re-coat with Cabot's CFP floor water-based.

Return Policy

We offer a hassle-free 30-day return policy on all products. If you're not completely satisfied, we'll make it right.

Return Eligibility

• Items must be returned within 30 days of purchase
• Products must be in original condition with all packaging and accessories
• Proof of purchase (order number or receipt) is required

Return Process

1. Contact our support team to initiate a return
2. Receive a prepaid return shipping label
3. Ship the item back to us
4. Receive a full refund within 5-7 business days of receipt

Exchanges

Need a different size or color? We offer free exchanges within 30 days. Simply contact us with your order details.

Non-Returnable Items

Custom orders and clearance items are final sale and cannot be returned.

Outdoor Use Guidelines

Many of our products are suitable for outdoor use. Check the product specifications for weather resistance ratings.

Weather Resistance Ratings

• IP54 Rating: Dust and splash resistant - suitable for covered outdoor areas
• IP65 Rating: Dust and water jet resistant - suitable for most outdoor conditions
• IP67 Rating: Dust and temporary immersion resistant - suitable for wet environments

Outdoor Care & Maintenance

• Clean regularly with mild soap and water
• Dry thoroughly after exposure to moisture
• Store indoors during extreme weather conditions
• Apply protective coating annually for extended outdoor use
• Avoid prolonged exposure to direct sunlight

Temperature Range

Most products operate safely between -10°C and 50°C. Check your product manual for specific temperature specifications.

Warranty for Outdoor Use

Outdoor use is covered under our standard warranty, provided proper care and maintenance guidelines are followed.