Cabot's Exterior Clear is a durable, marine grade polyurethane that provides protection and shine without hiding the grain. It offers resistance against weathering and moisture damage and incorporates the latest ultra-violet absorber technology to maximize gloss, performance, and durability.
PREPARATION
Note: Fill nail holes, cracks, and other defects with Cabot's Wood Tone Putty after applying the first coat of this product for accurate color matching. Remove stains, dirt, wax, grease, and oil with mineral turpentine. Remove any polish with a suitable polish remover.
Bare Interior Timber Sand the surface smooth using 180 - 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust.
Previously Coated Interior Timber Thoroughly clean the surface with Cabot's Floor Clean and allow it to dry. Sand with 180 - 240 grit sandpaper and remove all traces of sanding dust.
APPLICATION
Important - Work in a well-ventilated area and protect nearby surfaces from overspray. 1. Before spraying, shake the can well for about 1 minute, ensuring the mixing ball is moving vigorously inside the can. 2. Hold the can approximately 20cm away from the surface. Apply light coats with a quick, even motion, beginning and ending each stroke beyond the surface being sprayed until the desired finish is achieved.
NOTE: For exterior timber, a minimum of 4 coats is recommended, depending on the porosity of the timber. Clear the nozzle after each use by turning the can upside down and spraying for several seconds.
After Spraying Wipe the front of the nozzle clean. Clean up overspray while it is still wet.
Features
- Marine grade polyurethane for superior protection and shine.
- Resistant to weathering and moisture damage.
- Incorporates advanced UV absorber technology.
