Cabot's Stain And Varnish Water Based is a versatile product designed for all interior timber applications. This user-friendly formula provides a robust, stain and scratch-resistant finish that preserves the natural timber grain, protecting it from aging and wear. It is available in a variety of timber finishes to suit your needs.
PREPARATION
Note: Fill nail holes, cracks, and other defects with Cabot’s Wood Tone Putty after applying the first coat of this product for accurate color matching. Remove stains, dirt, wax, grease, and oil with mineral turpentine. Remove any polish with a suitable floor polish remover.
Bare Timber: Sand the surface smooth using 180 - 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust.
Previously Coated Timber: Completely remove the previous coating using a paint stripper or by sanding. Remove all traces of sanding dust.
APPLICATION
1. Stir thoroughly with a broad flat paddle until pigment is mixed in and color is uniform. Keep well stirred during use. If using more than one can, mix all cans together into a larger container to ensure color uniformity.
2. Apply with a good quality brush or roller.
3. Apply three coats depending on the required depth of color, allowing 2 hours between coats.
4. For best results, sand between coats using 240 grit sandpaper.
COLOUR STRENGTH: If the desired color is achieved after 1 or 2 coats of Cabot's Stain & Varnish Water Based, use Cabot's Cabothane Clear Water Based to complete the 3 coat system.
MAINTENANCE
Regular inspection of all coated surfaces is recommended. Re-coating is recommended when the coating looks dull or tired.
1. Clean with Cabot's Floor Clean following label instructions.
2. Sand with 240 grit sandpaper, remove all traces of sanding dust.
3. Apply 1-2 coats of Stain & Varnish Water Based.
Features
- Stain and scratch resistant
- Fast recoat - 2 hours
- Protects the natural timber grain
- Low odour
