Transform your outdoor spaces with the Crushed Pebble Effect Anchor Bay 10L. This product provides a decorative finish that is perfect for driveways, patios, and pathways. It boasts superior durability and is slip-resistant, making it ideal for paths, patios, and steps. For best results, use only with the Dulux Crushed Pebble Effect Roller, which is sold separately.
The Dulux Concrete & Paving Crushed Pebble Effect is a stunning, water-based finishing coat that adds an extra dimension to your projects. Customize concrete surfaces in your preferred color to achieve a decorative effect that is easy to maintain and withstands high-traffic areas for a durable, lasting finish. This product is the third and final stage in transforming your surface with the Dulux Concrete & Paving system. Ensure to use the Crushed Pebble Effect Roller for application. Suitable for use on bare concrete and sealed surfaces, once appropriate preparation has been completed using the Dulux Concrete & Paving Stage 1 and 2.
Tools required include the Dulux Concrete & Paving Crushed Pebble Effect Roller, a roller frame with an extension pole, a roller tray, and a 50-65mm brush. Use the preparation table above to determine which cleaners and primers will be required. Stir well before and during application with a broad, flat paddle using an up-and-down scooping action. Apply an even first coating of Dulux Concrete & Paving Decorative Texture using the Dulux Aggregate roller (recommended) and a good quality brush: 50-65mm. Apply from a roller tray or pour directly from the container. Work in areas of approximately 1m x 1m. Note that the first coat will act as the base coat and will not completely cover the surface by design. Avoid over-application on the first coat.
Allow to dry for 3-4 hours between coats, then repeat steps 2 and 3. Two coats are necessary, and additional coats may be required to hide previous surface imperfections or cover over contrasting colors. Note: Do not thin. For large projects, consider using a texture sprayer with a 4mm tip. Spray in 1.2m x 1.2m sections and back roll with the Dulux Aggregate roller. For touch-ups, make sure you are using the same application method that was originally used to apply the paint. Pouring tips: Pour a circular shape up to a 300mm diameter, spread with a roller from the center outwards, apply moderate pressure to the roller, and push the coating outwards in multiple directions to evenly distribute. Work quickly and overlap the previously coated areas to ensure full coverage. Avoid regular patterns and knock down hard edges using the roller. Note: Pouring can help spread the coating quickly; however, it may reduce the overall spread rate.
Features
- Provides a decorative finish ideal for driveways, patios, and pathways
- Superior durability and slip-resistant
- Use only with Dulux Crushed Pebble Effect Roller, sold separately
