Transform your surfaces with the Coloured Sealer Matt White 4L. This versatile sealer is tintable to Dulux colours, offering superior durability and slip resistance. It's ideal for garage floors, driveways, and paths, with a spread rate of up to 10m²/L. The Dulux Concrete & Paving Water-Based Topcoat is the final stage in this transformation, providing a hardwearing finish that is easy to clean and withstands high-traffic areas for a lasting finish.
For application, use a 15mm nap roller, a roller frame with an extension pole, a roller tray, and a 50-65mm brush. The topcoat is touch dry in 30 minutes, but allow it to fully dry before applying the second coat. Note that the product may appear lumpy due to anti-slip particles, which is normal and will mix through after a few minutes of stirring. Stir well before and during application with a broad, flat paddle using an up-and-down scooping action. Use a brush to cut in around edges or hard-to-reach places, then apply one coat of Dulux Concrete and Paving Topcoat using a roller. Work in small sections, slightly overlapping the previous section to minimize raised edges. Allow to fully dry before applying the second coat. For rough concrete with peaks and dips, use the edges of the roller or a paintbrush to work the paint into these dips. Allow to fully dry before applying the second coat. Congratulations, you have now completed all three stages. Please wait for the specified periods before walking or driving on your surface.
Features
- Superior durability and slip resistance
- Ideal for garage floors, driveways, and paths
- Easy to clean and withstands high-traffic areas
