Transform your concrete surfaces with Dulux Concrete & Paving Etch & Clean, a 2L solution designed to roughen concrete for optimal adhesion. This product is ideal for both new and old bare concrete, preparing the surface for the next stage in the Dulux Concrete & Paving system. With a spread rate of up to 12m²/L, it ensures thorough coverage and effective preparation.
Dulux Concrete & Paving Etch & Clean is the essential first step before coating bare concrete surfaces. Its concentrated formula penetrates the concrete, ensuring the best possible adhesion for subsequent paint layers. You will see it working within minutes, as it cleans and prepares the surface for Dulux Concrete & Paving Stage 2: Bare Concrete Primer. For application, use a stiff bristle broom and clean up with water. Always prioritize safety by wearing suitable protective clothing, including chemical-resistant gloves and eyewear.
Features
- Sweep the surface clean.
- Pressure wash to remove dirt and loose materials, ensuring the surface is free of pooled water.
- Mix the cleaner at a ratio of 1 part cleaner to 4 parts water, or 1 part cleaner to 2 parts water for heavily stained areas. Always add the cleaner to water, not the other way around.
- Apply the diluted solution evenly using a watering can and work it into the concrete with a stiff bristle broom. Wait for 15 minutes, then scrub again. Do not let the surface dry out; add more water if needed.
- Rinse off with a high-pressure washer. Repeat steps if necessary for heavily stained surfaces.
