Available for pickup
Usually ready in 4 hours
Available for pickup
Usually ready in 4 hours
400 Fifteenth Avenue
Austral NSW 2179
Australia
+61296060349
Out of stock
Usually ready in 4 hours
9 Elizabeth Drive
Kemps Creek NSW 2178
Australia
+61298261328
Product Information & Support
Explore detailed product specifications, access comprehensive guides and documentation, review our warranty and return policies, and read authentic customer reviews. Everything you need to make an informed decision.
Stain and scratch resistant|Fast recoat - 2 hours|Protects the natural timber grain|Low odour|Cabots's Stain and Varnish Water Based is a combined stain and varnish suitable for use on all interior timber. This easy to apply formula gives a durable, stain and scratch resistant finish that helps protect natural timber grain against age and wear. Available in a wide range of timber finishes.PREPARATIONNote: Fill nail holes, cracks and other defects with Cabot’s Wood Tone Putty after applying the first coat of this product for accurate colour matching. Remove stains, dirt, wax, grease and oil with mineral turpentine. Remove any polish with a suitable floor polish remover.Bare Timber Sand the surface smooth using 180 - 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust.Previously Coated Timber Completely remove the previous coating using a paint stripper or by sanding. Remove all traces of sanding dust.APPLICATION1. Stir thoroughly with a broad flat paddle until pigment is mixed in and colour is uniform. Keep well stirred during use. If using more than one can, mix all cans together into a larger container to ensure colour uniformity.2. Apply with a good quality brush or roller.3. Apply three coats depending on the required depth of colour, allowing 2 hours between coats.4. For best results, sand between coats using 240 grit sandpaper. COLOUR STRENGTH If the desired colour is achieved after 1 or 2 coats of Cabot's Stain & Varnish Water Based, use Cabot's Cabothane Clear Water Based to complete the 3 coat system.MAINTENANCERegular inspection of all coated surfaces is recommended. Re-coating is recommended when the coating looks dull or tired.1. Clean with Cabot's Floor Clean following label instructions.2. Sand with 240 grit sandpaper, remove all traces of sanding dust.3. Apply 1-2 coats of Stain & Varnish Water Based.
Dimensions: W75 x D75 x H80mm
Water - Based
Cabot's - Stain - & - Varnish - Water - Based - Walnut - Satin - 250ml
Product Guides & Documentation
Access all essential guides and documentation for your product. Click on any link below to download the PDF file.
- Assembly Guide - Step-by-step instructions for assembling your product
- User Manual - Complete user guide and operating instructions
- Installation Guide - Detailed installation and setup procedures
- Material Safety Data Sheet (MSDS) - Safety information and material specifications
Need Help? If you have trouble downloading or viewing these documents, please contact our support team.
Warranty & Return Policy
Manufacturer's Warranty
All products are covered by a comprehensive 2-year manufacturer's warranty that protects against defects in materials and workmanship.
- Manufacturing defects and material failures
- Component failures under normal use
- Workmanship issues
30-Day Return Policy
We stand behind our products with a hassle-free 30-day return policy. If you're not completely satisfied, we'll make it right.
- Contact our support team within 30 days of purchase
- Receive a prepaid return shipping label
- Ship the item back in original condition
- Receive full refund within 5-7 business days
Exchanges & Special Cases
Free Exchanges: Need a different size or color? We offer free exchanges within 30 days of purchase.
Final Sale Items: Custom orders and clearance items are final sale and cannot be returned or exchanged.
Questions? Contact our support team for assistance with warranty claims or returns.
Complete Your Setup
Discover complementary products that work perfectly with your purchase. Enhance your experience with our curated selection of compatible items.
Your Recently Viewed
Quickly access products you've been interested in. Pick up where you left off and find exactly what you're looking for.
Common Questions & Answers
Find answers to frequently asked questions about warranties, returns, shipping, and product care. Can't find what you're looking for? Contact our support team for personalized assistance.
Stain and scratch resistant|Fast recoat - 2 hours|Protects the natural timber grain|Low odour|Cabots's Stain and Varnish Water Based is a combined stain and varnish suitable for use on all interior timber. This easy to apply formula gives a durable, stain and scratch resistant finish that helps protect natural timber grain against age and wear. Available in a wide range of timber finishes.PREPARATIONNote: Fill nail holes, cracks and other defects with Cabot’s Wood Tone Putty after applying the first coat of this product for accurate colour matching. Remove stains, dirt, wax, grease and oil with mineral turpentine. Remove any polish with a suitable floor polish remover.Bare Timber Sand the surface smooth using 180 - 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust.Previously Coated Timber Completely remove the previous coating using a paint stripper or by sanding. Remove all traces of sanding dust.APPLICATION1. Stir thoroughly with a broad flat paddle until pigment is mixed in and colour is uniform. Keep well stirred during use. If using more than one can, mix all cans together into a larger container to ensure colour uniformity.2. Apply with a good quality brush or roller.3. Apply three coats depending on the required depth of colour, allowing 2 hours between coats.4. For best results, sand between coats using 240 grit sandpaper. COLOUR STRENGTH If the desired colour is achieved after 1 or 2 coats of Cabot's Stain & Varnish Water Based, use Cabot's Cabothane Clear Water Based to complete the 3 coat system.MAINTENANCERegular inspection of all coated surfaces is recommended. Re-coating is recommended when the coating looks dull or tired.1. Clean with Cabot's Floor Clean following label instructions.2. Sand with 240 grit sandpaper, remove all traces of sanding dust.3. Apply 1-2 coats of Stain & Varnish Water Based.
Return Policy
We offer a hassle-free 30-day return policy on all products. If you're not completely satisfied, we'll make it right.
Return Eligibility
- Items must be returned within 30 days of purchase
- Products must be in original condition with all packaging and accessories
- Proof of purchase (order number or receipt) is required
Return Process
- Contact our support team to initiate a return
- Receive a prepaid return shipping label
- Ship the item back to us
- Receive a full refund within 5-7 business days of receipt
Exchanges
Need a different size or color? We offer free exchanges within 30 days. Simply contact us with your order details.
Non-Returnable Items
Custom orders and clearance items are final sale and cannot be returned.
Outdoor Use Guidelines
Many of our products are suitable for outdoor use. Check the product specifications for weather resistance ratings.
Weather Resistance Ratings
- IP54 Rating: Dust and splash resistant - suitable for covered outdoor areas
- IP65 Rating: Dust and water jet resistant - suitable for most outdoor conditions
- IP67 Rating: Dust and temporary immersion resistant - suitable for wet environments
Outdoor Care & Maintenance
- Clean regularly with mild soap and water
- Dry thoroughly after exposure to moisture
- Store indoors during extreme weather conditions
- Apply protective coating annually for extended outdoor use
- Avoid prolonged exposure to direct sunlight
Temperature Range
Most products operate safely between -10°C and 50°C. Check your product manual for specific temperature specifications.
Warranty for Outdoor Use
Outdoor use is covered under our standard warranty, provided proper care and maintenance guidelines are followed.
