Cabot's Interior Stain Water Based is a penetrating stain designed for interior doors, windows, trim, and furniture. It is user-friendly and effectively transforms the color of interior timber.
PREPARATIONNote: Fill nail holes, cracks, and other defects with Cabot’s Wood Tone Putty after applying the first coat of this product for accurate color matching. Remove stains, dirt, wax, grease, and oil with mineral turpentine. Remove any polish with a suitable floor polish remover.
Bare TimberSand the surface smooth using 180 – 240 grit sandpaper. Sand only in the direction of the grain. Remove all traces of sanding dust.
Previously Coated TimberCompletely remove the previous coating using a paint stripper or by sanding. Remove all traces of sanding dust.
IMPORTANTThe natural color of the timber will affect the finished color of the stain. The clear coating used to seal the stain may also have some effect on the final color. Always test the stain on an off-cut or concealed part of the actual job before proceeding.
Staining a FloorFor the best method of staining a floor, please refer to the Cabot’s Stain & Varnish range.
APPLICATIONApply with brush, rag, or roller.
1. Stir thoroughly with a broad flat paddle until the pigment is mixed in and the color is uniform. Keep well stirred during use. If using more than one can, mix all cans together in a larger container to ensure color uniformity.
2. Apply with a good quality brush, roller, or lint-free rag and work the stain evenly into the grain.
3. Allow to set for 1 – 5 minutes then rub with a clean soft cloth using a circular motion to remove any excess stain and produce an even-colored surface. The intensity of the color will depend on the porosity of the timber and the length of time before the stain is wiped off.
4. Allow 2 hours drying time.
5. Apply Cabot’s Cabothane Clear Water Based as a top coat following label instructions.
MAINTENANCERegular inspection of all coated surfaces is recommended. Once water repellency has diminished, re-apply the existing topcoat as per label instructions. If the timber needs re-staining, sand back to bare.
Features
- Enhances timber grain
- Easy to apply
- Low odour