{"product_id":"intergrain-ultradeck-timber-decking-oil-natural-1l","title":"Intergrain UltraDeck Timber Decking Oil Natural 1L","description":"\u003cp\u003e\u003cstrong\u003eIntergrain UltraDeck timber oil\u003c\/strong\u003e is a high performance, water-based decking finish that delivers an exceptionally durable, long-lasting finish to enhance the natural beauty of your timber. \u003cstrong\u003eUltraDeck timber oil\u003c\/strong\u003e weathers naturally, reducing the risk of flaking, blistering, and peeling over time.\u003c\/p\u003e\u003cp\u003eMaintenance coat of \u003cstrong\u003eIntergrain UltraDeck Timber Oil\u003c\/strong\u003e: If your existing \u003cstrong\u003eIntergrain UltraDeck Timber Oil\u003c\/strong\u003e coating is in good condition, clean the surface with \u003cstrong\u003eIntergrain UltraPrep™ Timber Cleaner\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eNew timber: Treat timber with \u003cstrong\u003eIntergrain UltraPrep Tannin \u0026amp; Oil Remover\u003c\/strong\u003e. Then clean with \u003cstrong\u003eIntergrain UltraPrep Timber Cleaner\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eGrey and weathered with no previous coating: Clean with \u003cstrong\u003eIntergrain UltraPrep Timber Cleaner\u003c\/strong\u003e. For severely weathered timber, sand back to a fresh surface, remove all sanding dust, then clean with \u003cstrong\u003eIntergrain UltraPrep Timber Cleaner\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eExisting coating in poor condition: Remove coating by using a combination of \u003cstrong\u003eIntergrain UltraPrep Tannin \u0026amp; Oil Remover\u003c\/strong\u003e and power washing. Then clean with \u003cstrong\u003eIntergrain UltraPrep Timber Cleaner\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003ePaints, varnishes or coatings in varied condition: Paints, varnishes or coatings that have deteriorated unevenly, remove all existing coating by using a coatings stripper or sanding back to bare timber. Then clean with \u003cstrong\u003eIntergrain UltraPrep Timber Cleaner\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e If mould is present or if timber is in a mould-prone area, use \u003cstrong\u003eIntergrain UltraPrep Mould Killer\u003c\/strong\u003e to remove surface mould effectively as the first step of preparing the timber for coating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e1. Remove excess water from the surface and allow the timber to dry for at least 1 hour before coating. Stir \u003cstrong\u003eIntergrain UltraDeck Timber Oil\u003c\/strong\u003e thoroughly before and during use with a flat blade stirrer.\u003c\/p\u003e\u003cp\u003e2. Apply \u003cstrong\u003eIntergrain UltraDeck Timber Oil\u003c\/strong\u003e using the \u003cstrong\u003eIntergrain DeckBrush\u003c\/strong\u003e (recommended), flat deck applicator, paint brush or spray (air-assisted airless or airless). Do not use a roller. Apply at the coverage rate of 10-14m²\/L. Do not overspread or apply thinly as insufficient film thickness will result in lap marks and compromise performance and durability. When coating large areas, work in sections, apply long strokes and use natural breaks in the boards as stopping points. If spraying, it is recommended to back brush to even out the finish and avoid spotting.\u003c\/p\u003e\u003cp\u003e3. Allow to dry for at least 3 hours, then apply a second coat. If necessary, sand lightly between coats to remove any raised grain.\u003c\/p\u003e\u003cp\u003e4. A third coat will give extra protection and is required in harsh conditions such as full sun exposure, around pools and in humid areas or if the first coat was applied on damp or porous timber. \u003cstrong\u003eImportant:\u003c\/strong\u003e All timber is required to be free from dust, mould, and site contaminants prior to coating. Follow all relevant product label instructions when using \u003cstrong\u003eIntergrain\u003c\/strong\u003e products.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMAINTENANCE\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMaintenance: Conduct a routine 12-monthly maintenance inspection. Best protection of the timber and ease of maintenance is ensured if \u003cstrong\u003eIntergrain UltraDeck Timber Oil\u003c\/strong\u003e is recoated before deterioration of the coating and timber underneath occurs. To refresh timber with significant signs of weathering, greying, or mould, prepare the surface as per the directions under \u003cstrong\u003eSURFACE PREPARATION\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e \u003cli\u003eLasts 3X longer than oil-based decking oils\u003c\/li\u003e \u003cli\u003eHigh traffic formula\u003c\/li\u003e \u003cli\u003eProfessional results\u003c\/li\u003e \u003cli\u003eNo peeling or blistering\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cabot's Australia","offers":[{"title":"Default Title","offer_id":45166049034377,"sku":"C1374A","price":57.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/7870\/7081\/files\/Intergrain_1L_Natural_Water_Based_UltraDeck_Timber_Oil.webp?v=1770385481","url":"https:\/\/builderscentre.com.au\/products\/intergrain-ultradeck-timber-decking-oil-natural-1l","provider":"Builders Centre","version":"1.0","type":"link"}